532 nm Laser (DPSS; PM Fiber)

Item Code:
0532L-15B-NI-PT-NF
Product status:
Preliminary Product specifications are subject to change, delivery time is less predictable.
Availability:

Description
532 nm PM fiber-coupled laser module is mostly used for fluorescence excitation, scanning microscopy, and general green light illumination. Metal fiber jacket is used as a standard in order to provide a very robust laser for most demanding applications.
Specifications
Last edited on:  12 November 2019
Parameter Minimum Value Typical Value Maximum Value
 Central Wavelength, nm 532 532.1 532.2
 Longitudinal modes - multiple -
 Spectral line width FWHM, nm - 0.3 0.5
 Output power, mW - 100 1 -
 Power stability, % (RMS, 8 hrs) - 1 2 2
 Power stability, % (peak-to-peak, 8 hrs) - 2 3 3
 Noise, % (RMS, 20 Hz to 20 MHz) - 3 4 30
 Transversal modes - TEM00 -
 M2 effective - 1.05 1.1
 Polarization direction - Aligned within the slow axis of the PM fiber and the key position. -
 Polarization extinction ratio (from PM fiber), dB 20 23 30
 Control interface type - UART 5 -
 Operation mode - APC (CW) -
 Modulation bandwidth, MHz - N/A 6 -
 Input voltage, VDC 4.8 5 5.3
 External power supply requirement - +5 V DC, 5A -
 Dimensions, mm - 50 x 30 x 18 7 -
 Heat-sinking requirement, °C/W - 0.5 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) 0.2 1 2
 Temperature stabilization - Internal TEC -
 Overheat protection - Yes -
 Storage temperature, °C (non-condensing) -10 - 50
 Net weight, kg 0.1 0.12 0.14
 Max. power consumption, W 5 10 20
 Warranty, months (op. hrs) - 14 (10000) 8 -
 Residual IR wavelength contrast - 20 -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC
-
 Laser Safety Class - 3B -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Country of origin - Lithuania -
1 The optical power can be tuned from virtually 0% to 100%. However, other specifications, such as central wavelength, power stability, noise, polarization ratio, beam shape, quality and circularity are not guaranteed at power levels other than factory preset power. Significantly worse power stability is to be expected at very low power levels, e.g. <3% from specified nominal power.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 Break-out-boxes AM-C8 and AM-H10 can be used for conversion of UART communication to either USB or RS232.
6 Slow TTL modulation can be enabled on request.
7 Excluding control interface pins and an output window/fiber assembly.
8 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum

Spectrum of 532 nm Laser (DPSS; PM Fiber)
Typical spectrum of 0532 nm DPSS laser. Measured with 20 pm resolution.
Typical Near Field

Near field beam profile of 532 nm Laser (DPSS; PM Fiber)
Drawing

Drawing of 532 nm Laser (DPSS; PM Fiber)
The key dimensions of a fiber-coupled MatchBox.