785 nm Narrow Linewidth Laser (HP VBG Diode; SMA)

Item Code:
0785L-46A-NI-NT-NF
Product status:
Full production Product specifications are stable. Delivery time is predictable.
Availability:

Description
This 785 nm laser features single-longitudinal-mode (SLM) and operates in multiple transversal modes. It used mainly in industrial applications of Raman spectroscopy, where high-power single-frequency operation is needed without the necessity of sharp focusing.
The transversal modes are distributed in one row, thus the fast axis can be focussed with M2 ~1.3, while the slow axis has multiple modes and its focusability is poor - theoretically, it can be focussed to a width of ~50 µm.
This laser is a Volume Bragg Grating (VBG) stabilized diode laser, which is distinguished by high electrical efficiency and exceptional wavelength stability.
Specifications
Last edited on:  14 November 2019
Parameter Minimum Value Typical Value Maximum Value
 Central Wavelength, nm 784.5 785 785.5
 Longitudinal modes - Narrow Spectrum -
 Transversal modes - Multiple -
 Spectral line width FWHM, pm - 30 50
 Output power, mW - 350 1 -
 Side-mode suppression ratio (SMSR), dB 40 50 60
 Power stability, % (RMS, 8 hrs) - 1 2 2
 Power stability, % (peak-to-peak, 8 hrs) - 2 3 3
 Noise, % (RMS, 20 Hz to 20 MHz) - 0.25 4 0.6
 Transversal modes - TEM00 -
 M2 effective - N/A -
 Polarization contrast 1000 1500 2500
 Polarization direction - Vertical -
 Control interface type - UART 5 -
 Operation mode - APC (CW) -
 Modulation bandwidth, MHz - N/A -
 Input voltage, VDC 4.8 5 5.3
 External power supply requirement - +5 V DC, 1.5 A -
 Dimensions, mm - 50 x 30 x 18 6 -
 Beam height from the base, mm 9.9 10.4 10.9
 Heat-sinking requirement, °C/W - 1 -
 Optimum heatsink temperature, °C 15 20 30
 Warm up time, mins (cold start) 0.2 1 2
 Temperature stabilization - Internal TEC -
 Overheat protection - 2 -
 Storage temperature, °C (non-condensing) -10 - 50
 Net weight, kg 0.1 0.12 0.14
 Max. power consumption, W 0.4 2 10
 Warranty, months (op. hrs) - 14 (10000) 7 -
 RoHS - Yes -
 CE compliance - - General Product Safety Directive (GPSD) 2001/95/EC
- (EMC) Directive 2004/108/EC
-
 Laser Safety Class - 3B -
 OEM lasers are not compliant with - IEC60825-1:2014 (compliant using additional accessories) -
 Country of origin - Lithuania -
1 The output power of SLM lasers shall not be tuned and SLM performance is not guaranteed at power ratings other than factory preset. However, the power setting capability is not disabled. External attenuators are recommended instead.
2 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
3 The long term power test is carried out at constant laser body temperature (+/-0.1 ‎°C) using an optical power meter with an input bandwidth of 10 Hz. The actual measurement rate has a period of about 20 seconds to 1 minute.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 Break-out-boxes AM-C8 and AM-H10 can be used for conversion of UART communication to either USB or RS232.
6 Excluding control interface pins and an output window/fiber assembly.
7 Whichever occurs first. The laser has an integrated operational hours counter.
Note: Product specifications are subject to change without prior notice to improve reliability, function or design or otherwise.
Typical spectrum

Spectrum of 785 nm Narrow Linewidth Laser (HP VBG Diode; SMA)
Typical spectrum of 0785 nm diode laser. Measured with 20 pm resolution.
Drawing

Drawing of 785 nm Narrow Linewidth Laser (HP VBG Diode; SMA)
None