Fiber Termination - FC/PC (PT): FC/PC has good insertion repeatability, therefore is often used in single-mode fiber applications. Features a key for polarization-maintaining fiber installations.
Rent a high-performance laser for a time-limited experiment. Or try several laser options before deciding, which to choose.
Your request has been sent successfully. We'll get back to you as soon as possible.
Back to homepageBegin your product purchase process, with flexibility for customization based on your needs.
Your request has been sent successfully. We'll get back to you as soon as possible.
Back to homepageParameter | Minimum Value | Typical Value | Maximum Value |
---|---|---|---|
 Output power, mW | - | 405 nm - 100 488 nm - 40 |
- |
 Wavelength tolerance, nm | 400 480 |
405 488 |
410 495 |
 Power stability, % (RMS, 8 hrs) | - | 0.2 | - |
 Longitudinal modes | - | Multiple | - |
 Spectral line width FWHM, nm | - | <1.5 | - |
 Transversal modes | - | TEM00 | - |
 Control interface type 1 | - | UART | - |
 Operation mode | - | ACC (CW) | - |
 Modulation bandwidth, MHz 2 | - | 10 | - |
 Input voltage, VDC | - | 9 | 12 |
 External power supply requirement 3 | - | +9 V DC, 1.5 A | +12 V DC, 1.5 A |
 External power supply requirement | - | External Power Supply Requirement | - |
 Intensity noise, % (RMS, 20 Hz to 20 MHz) 4 | - | <1 | - |
 Dimensions (WxDxH), mm | - | 50 x 30 x 18 | - |
 Beam height from the base, mm | - | 10.4 | - |
 Heat-sinking requirement, °C/W | - | <0.5 | - |
 Optimum heatsink temperature, °C | - | 25 | - |
 Warm up time, mins (cold start) | - | < 1 min | - |
 Temperature stabilization | - | Internal TEC | - |
 Overheat protection | - | Yes | - |
 Storage temperature, °C (non-condensing) | - | - | - |
 Net weight, kg | - | 0.3 | - |
 Max. power consumption, W | - | 2 | - |
 Warranty, months (op. hrs) 5 | - | 14 (10000) | - |
 RoHS | - | Yes | - |
 CE compliance | - | - General Product Safety Directive (GPSD) 2001/95/EC - (EMC) Directive 2004/108/EC | - |
 OEM lasers are not compliant with | - | IEC60825-1:2014 | - |
1 The break-out-box AM-C9 can be used for conversion of UART communication to USB.
2 TTL digital modulation up to 10 MHz.
3 If the break-out-box AM-C9 is used, a PD (Power Delivery) type of power supply can be used.
4 Noise level is measured with a fast photodiode connected to an oscilloscope. The overall system bandwidth is from 2 kHz to 20 MHz.
5 Whichever occurs first.
None
Laser Combiner Accessory Bundle
USB Break-out-Box for Multi-Wavelength MatchBoxⓇ
18W USB type C power supply
60W USB type C power supply
Compact Fan Cooler For MatchBox®
Fan Cooler for MatchBox®
Compact TEC-Cooled Mounting Plate For MatchBox
MatchBoxⓇ Adapter For 25mm Post
Safety key box
Laser Safety Goggles for 180-532 nm